9-1.50.030 Waste reduction plan.
a. Applicants for any project must submit a properly completed waste reduction plan, identifying all waste materials expected to be generated as a result of the project at the time of demolition or building permit application. No building or demolition permit shall be issued until the applicant has submitted a waste reduction plan in the form required by the Building Official and until the waste reduction plan has been approved by the Building Official or designee.
b. The waste reduction plan must contain, at a minimum, the following:
1. The type of project;
2. The total square footage of the project;
3. The estimated weight of project construction and demolition debris to be generated by material type;
4. The construction and demolition debris materials that will be diverted from disposal by recycling, reuse on the project or salvage for future use or sale;
5. If construction and demolition debris will be sorted on site (source-separated) or bulk mixed (single stream);
6. Diversion facilities where the construction and demolition debris will be taken;
7. Construction methods taken to reduce the amount of construction and demolition debris generated; and
8. The amount of construction and demolition debris diverted by weight.
c. Every person or entity to whom a building or demolition permit has been issued (“permittee”) shall comply, and require their subcontractors to comply, with the provisions of the approved waste reduction plan applicable to the permit.
d. If the permittee subsequently wishes to amend the approved waste reduction plan, the permittee shall submit the request in writing to the Building Official. The Building Official or their designee shall approve or deny the requested amendment, as submitted or as modified by the Building Official or their designee, as appropriate.
e. The permittee shall collect and retain (1) weight tickets; (2) an inventory of reused items; (3) receipts and other records from all recipients of discarded material that demonstrate the reuse, recycling, and disposal of all material generated by and hauled from the project; and (4) such other documentation as necessary to establish compliance with the approved waste reduction plan.
f. The permittee shall, for commercial projects involving additions and alterations, verify that universal waste items, including fluorescent lamps and ballast and mercury-containing thermostats, are properly disposed of and diverted from the landfills. “Universal waste” means batteries, electronic devices, mercury-containing equipment, lamps, cathode ray tubes or glass, and aerosol cans. A list of prohibited universal waste materials shall be included in the construction documents.
g. Prior to final inspection of the project or as otherwise required by the waste reduction plan, the permittee shall complete and submit to the building official a diversion summary sheet and the documentation described in subsection (e) of this section. (Ord. #260-2022, S1)